Drop In Anchor2

Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the pre-drilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete.

Drop-in anchor with a notch is a structure consisting of a tapered inner cavity with a thread tapering towards the tip. Due to this, as the bolt is tightened, the anchor begins to expand. This allows the desired structure to be firmly attached to the wall. And due to the thread located on its inner part, it will be possible to easily screw various fasteners into it.

▪Material Available – Carbon Steel with zinc plated, Stainless Steel.

▪Custom Sizes - Our unique mass customization manufacturing operation allows us to customize sizes far more easily than any other provider.

▪Custom Finish - We can offer zinc plating, nickel plating, chrome plating, hot deep galvanized, a standard plasticized finish.

•The holding values of the Drop-In anchor are mainly dependent on the psi of the concrete and on the depth of embedment. Other factors include if steel rebar is in the concrete and on the full expansion of the Drop-In anchor.

•The Drop-In anchor has sides that are smooth to allow for more surface area to be in contact with the concrete, thereby providing consistent holding values.

Installation Instructions

•As with all female type anchors, the designated diameter of the Drop-In anchor refers to the side diameter of the anchor.

•The outside diameter of the anchor is equal to the hole diameter required to be drilled in the concrete.

•Minimum embedment for each diameter of Drop-In anchor is the length of the anchor.

•The Drop-In Anchor requires the bottom of the hole to set the anchor.

•First, drop the anchor in the hole with the threaded open end up towards the surface, then insert proper setting tool and hit with a hammer until the Drop-In anchor is fully set.

Drop-In Anchor

Steel anchor for heavy duty fixing designed for structural fixing, of static type, on solid supports.

Item No.	Size	Inner metric thread	Outer anchor diameter	Sleeve length	Bag	Carton
		mm	mm	mm	pcs	pcs
DA 28001	M6X25	M6	8	25	100	100
DA 28002	M8X30	M8	10	30	100	100
DA 28003	M10X40	M10	12	40	100	100
DA 28004	M12X50	M12	16	50	50	50
DA 28005	M14X55	M14	18	55	35	35
DA 28006	M16X65	M16	20	65	25	25
DA 28007	M20X80	M20	25	80	25	25

Application

Drop-in anchor with a notch can be used for reliable fixation of large-sized equipment in brick, stone, concrete under moderate-heavy loads. Their main use is to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads. It is intended: For the construction of suspension systems; For installation of suspended ceilings; For laying cable routes; For hanging small loads.

Quick Delivery

Large stock and quick delivery than every competitor
Quality Control

Strong R&D team and strict QC system ensure the quality, Less than 0.3% product failure rate
Research & Innovation

Continuous Innovation and research and development, improve process, stabilize product quality and improve production efficiency

Youtube
social-linkedin
instagram

Want to win the competition?

YOU NEED A GOOD PARTNER
All you have to do is contact us and we will provide you with solutions that will allow you to win against your competitors and will pay you handsomely.